Tuning Channels; Setting The Channel Tuning Mode; Tuning In To The Next Programmed Channel; Tuning In To A Specific Channel (Programmed Or Unprogrammed) - Toshiba 46UL610U Owner's Manual

Tuning channels

Setting the Channel Tuning Mode

You can select how tuning is handled for analog and
digital channels when the TV is in Antenna mode.
Note: To use this feature, ANT/CABLE In must be set to
Antenna (- p. 30).
1
> Settings > SETUP > TV Settings >
2
Press B or b to highlight Channel Tuning Mode.
Mode Description
You can tune both analog and digital
Standard
channels normally.
Digital channels have priority when
manually entering a channel number
Auto
using the 0-9 buttons on the remote. To
(default)
tune analog channels, use
available.
Digital You can only tune digital channels.
3
Press C or c to select a mode. Press
Note: The Channel Options screen and the Channel
Browser ANT/CABLE List are updated when you change
the mode. The History List is cleared.
Tuning in to the next programmed
channel
CH
Press or on the remote control or TV control
CH
panel.
Note: This feature does not work unless you store
channels in the TV's channel memory (- p. 30).
Tuning in to a specific channel
(programmed or unprogrammed)
Channel Description
Use the 0–9 buttons on the remote
Analog control. (For example, to select
channel 125, press 1, 2, 5.) Press
Use the 0–9 buttons on the remote
control to enter the major channel
number. Press the dash (
Digital
Enter the sub-channel number. (For
example, to select digital channel 125-
1, press 1, 2, 5, –, 1.) Press
Chapter 6: Basic features

Using the Channel Browser

The Channel Browser
interface for all of your channels and inputs.
Features:
•Navigate the contents of all of your inputs.
•Keep a list of your favorite channels.
•Keep a history of the last 32 channels or inputs
viewed.
•Quickly surf and tune to your recently viewed
channels/inputs from the Channel Browser
List.
.
OK
•Surf via Browse mode (to immediately tune to
channels as you highlight them in the
Channel Browser
in the Channel Browser
to).
•Quickly change inputs from the Inputs List.
•Quickly select HDMI
CEC Control List.
CH
/ if To set up the Channel Browser
CH
1
Browser Setup >
2
Press b or B to highlight Navigation.
.
3
Press C or c to select Select Mode or Browse
Mode.
4
Select a list.
• History List
• ANT/CABLE List
• Inputs List
• Favorite List
• HDMI-CEC Control List
Note:
• The History List will be cleared every time the TV is
powered off.
• The HDMI-CEC Control List is not available when
Enable HDMI-CEC Control is set to Off (- p. 48).
5
Select On or Off.
6
To return to factory defaults, highlight Reset and
press
To open the Channel Browser
• > Settings > APPLICATIONS > Channel
Browser >
•Press
.
OK
) button.
-
.
OK
™
is a helpful navigational
™ ) or Select mode (to surf channels
™ before you select one to tune
®
CEC devices from the HDMI-
™
:
> Settings > PREFERENCES > Channel
.
O K
.
O K
™ :
.
O K
or .
™
™ History
41