Advertisement
2.
HotTab – Installation
The standard way to install HotTab Tool is to use the setup.exe file.
Needed software:
Software and installation sequence
1. Driver - WMMIO v3.1
for Windows 8.1/10 (64-Bit)
Driver is necessary for use of the HotTab
System Utility
2. Hottab System Utility
3. Hottab Camera Application
1. Install the WMMIO driver package.
Driver - WMMIO v3.1
Driver is necessary for use of the HotTab System Utility
2. Start installation of HotTab with double click on the setup.exe file.
3. Follow the installation setup.
4. If you have Agile X IS (type: 17-A1B4-..../.......) then install HotTab camera installation in same way
as HotTab tool.
5. Perform a reboot to finish the installation.
4/6
Agile X Series
Installation of HotTab Tool
type 17-A1B4-..../........ or B7-A234-4.../........
WHQL
Check the installed HotTab version before you start installation of latest available version.
You can check the installed version:
-
In settings under category apps or installed programs
-
In HotTab tool under category settings
If installed version is older than uninstall first before you start installation.
for Windows 8.1/10 (64-Bit)
WHQL
Required for Agile X
Type: B7-A234-4.../.......
Yes
Yes
No
Required for Agile X IS
Type: 17-A1B4-..../.......
Yes
Yes
Yes
Technical changes reserved.
Revision 0 – 05/2018
Advertisement
