Summary of Contents for KegLand Fermzilla Unitank Series
Page 1
Fermzilla Leak Fix Instruction Manual (for Unitank and All Rounder models) www.KegLand.com.au Last Updated 24/03/2020 4:30 PM Page 1 of 6...
Page 2
If the o-ring is damaged replace it with a new undamaged o-ring Part KL14267. Also inspect the lid for any damage while the o-ring is removed. If the lid is damaged replace with an undamaged lid Part KL11402. www.KegLand.com.au Last Updated 24/03/2020 4:30 PM Page 2 of 6...
Page 3
Fermzilla. If you are still experiencing issues please send through a video to the email beer@kegland.com.au showing where the leak is occurring (leak test) and photos of the condition of the lid and o-ring.
Page 4
NOTE: If you determine that the o-ring is damaged you may need to replace it. We do not stock replacement o-rings however, the o-rings designed for camlock fittings also fit the carbonation caps Part KL07177. Replace with camlock seal www.KegLand.com.au Last Updated 24/03/2020 4:30 PM Page 4 of 6...
Page 5
If you are still experiencing issues with the carbonation caps then please send through a video to the email beer@kegland.com.au showing where the leak is occurring (leak test) and photos of the condition of the carbonation cap and the o-rings.
Page 6
Step 4. Rotate the collection vessel clockwise with the oil removal tool. HINT: You can use a second oil removal to hold the spigot collar allowing you to apply more torque. If you are still experiencing issues with the collection vessel then please email beer@kegland.com.au www.KegLand.com.au Last Updated 24/03/2020 4:30 PM...