Inserting And Removing Pc Cards; Setting Up A Pc Card For Your Computer; Inserting A Pc Card - Toshiba Tecra M3 Series User Manual

M3 user's guide
Hide thumbs Also See for Tecra M3 Series:
Table of Contents

Advertisement

Inserting and removing PC Cards

Your computer comes with one PC Card slot and supports
two types of PC Cards:
Type I cards—You can install one of these cards.
Type II cards—You can install one of these cards.

Setting up a PC Card for your computer

Some PC Cards are ready to use as soon as you install them.
Others, such as hard disk cards, network cards, and SCSI
adapters, may need to be set up to work with your computer.
To set up your PC Card, refer to the documentation that came
with the card or refer to your operating system manual or
online help.

Inserting a PC Card

Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before
you insert it.
Connecting Other External Devices
Inserting and removing PC Cards
TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check
the package to make sure they conform to the PCMCIA 2.1
standard (or later). Other cards may work with your computer,
but are likely to be much more difficult to set up and use.
You can only use PC Cards in the bottom slot or ExpressCards
in the top slot. You cannot insert a PC Card into the
ExpressCard slot (the upper slot), nor can you insert an
ExpressCard into the PC card slot (the lower slot).
93

Advertisement

Table of Contents
loading

Table of Contents