Directing The Display Output When You Turn On The Computer - Toshiba Tecra M3 Series User Manual

4 Set the display mode by pressing
Display Properties settings. For more information, see
below.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB port on the
back of the computer.
2 Connect the device's power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
Display Properties settings. For more information, see
below.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 Press
2 While holding down
setting you want takes effect.
This hot key cycles through the settings in the following
order:
❖
❖
❖
❖
Connecting Other External Devices
Using external display devices
and simultaneously.
Fn F5
Built-in display only
Built-in display and external device simultaneously
External device only
Built-in display and TV (or other external video device)
simultaneously
Fn + F5
Fn + F5
, press repeatedly until the
Fn F5
63
or by using the
or by setting the
Fn + F5
):