Inserting And Removing Pc Cards; Inserting A Pc Card - Toshiba TE2300 User Manual

74
Connecting Other External Devices

Inserting and removing PC Cards

Your computer comes with two stacked PC Card slots and
supports three types of PC Cards:
❖
Type I cards — You can install up to two of these cards,
one in each slot.
❖
Type II cards — You can install up to two of these cards,
one in each slot.
❖
Type III cards — You can install just one of these cards.

Inserting a PC Card

NOTE
Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before
you insert it.
To insert a PC Card:
1 Turn off the computer.
You may also hot swap a PC Card. Stop the PC Card by
clicking the Safely Remove Hardware icon on the System
Tray. After the PC Card is stopped, it is safe to remove.
2 Locate the PC Card slot on the left side of the computer.
3 If the PC Card slots are locked, unlock them by turning
the computer over, locating the PC Card lock and sliding
the lock into the unlocked position.
Use caution when lifting or turning your computer. Failure to
do so may result in damage to components, such as cables,
attached to your computer, or to the computer itself.