Inserting An Sd™ Card - Toshiba Tecra M3 Series User Manual

Inserting an SD™ card
Important: Do not use the Copy Disk function for SD cards.
In order to copy data from one SD card to another, use the
following procedure:
1 Format the target SD card in the same format as the source SD
card.
2 Insert the source SD card.
3 Create a temporary folder on the hard disk drive.
4 Copy the contents of the source SD card into the
temporary folder you created in step 3.
5 Remove the source SD card.
6 Insert the target SD card created in step 1.
7 Copy the file contents from the temporary folder to the
target SD card.
8 Eject the target SD card.
NOTE
Locate the SD card slot on the left side of the computer.
To insert an SD card:
1 Turn the card so that the connector (metal area) faces down,
then push the card into the slot until it locks in place.
If Windows
it, verify that the card is facing the right way, and insert it
again.
The SD light on the front of the computer glows green when
the card is being accessed.
Connecting Other External Devices
MMC cards (multimedia cards) do not work in this slot.
® does not recognize an inserted SD card, remove
Inserting an SD™ card
97