Code The Meter - B. Braun Omnitest plus Manual

Code the Meter

Code numbers are used to calibrate the Omnitest
accurate results. You must confirm the code number of the test strip
vial with the number shown on the meter, before using Omnitest
plus test strips.
?
Insert Omnitest plus test strip to turn on the meter. The code
®
number will appear on the display for 3 seconds. Compare the code
number (example; C25) on the meter's display with the code num-
ber on the test strip vial. If these two code numbers match, you can
start testing. If these two code numbers do not match, you must
code the meter according to the test strip vial code number.
14
plus meter for
®
Press
decrease the code number. The number increases or decreases by
®
one digit every time you press
number appears on the display. The code number increases or
decreases automatically and fast while holding to press
button.
If you missed to set the right code
number, insert the test strip again.
Without matching the code numbers, you will not get accu-
rate test results of your blood glucose level.
button to increase the code number or
✔
Caution
button to
or button while the code
or
15