Table of Contents
Advertisement
Maintain Your Blood Glucose Monitor Sys tem
Fore safe, accurate, and long-term use of the meter, be sure that the
meter is maintained with proper care.
1.
The meter should be cared after test, and cleaned if neces-
sary with soft cloth or paper tissues. Objects which had been
in contact with blood bear the potential risk for transmitting
an infectious disease. If necessary, alcohol swab can be used
to wipe out dirt on the outer surface of the meter, but che-
mi cal solution such as benzene or acetone MUST NOT be
used since either of those can harm and damage the meter
surface. When cleansing the meter with pure alcohol, DO
NOT pour directly onto the meter, but use the cloth soaked
with properly small amount of alcohol. After cleansing the
meter, dry completely at a cool place avoiding direct sun-
light.
2.
Do not soak the meter and test strip into water or liquid. Use
as properly as you can. Strong electromagnetic fields (e.g.
mobile phones, microwave ovens) could disturb the meter
function. Do not put the meter and strip near fire or micro -
wave ovens.
44
3.
After test, put the parts of Omnitest
gether, and keep it at a cool and dry place out of the reach of
children. Do not refrigerate. Avoid exposure to the sun.
4.
For detailed storage instructions for Omnitest
refer to the user's manual of Omnitest
5.
The lancing device should be cleaned if blood or stain remains
after test for infectious disease prevention.
6.
When you use up the lancets or lancing device is damaged,
you can purchase them at your nearest pharmacy or B. Braun
representative.
7.
Discharge used materials according to the local regulations
for contaminated materials.
plus in the pouch to-
®
plus test strips,
®
plus test strip.
®
45
Advertisement
Table of Contents
