B. Braun Omnitest plus Manual page 19

Testing Your Blood Glucose
1
Insert the Test Strip
Remove test strip from the vial. Recap
the vial immediately to prevent moisture
from affecting the other strips. Insert a
test strip. Push the test strip until it will
go no further without bending the strip.
36
2
Compare the Code Number
The meter will automatically turn on and
display the code number. Make sure the
code number on the display matches the
code number on the test strip vial. If the
code number does not match, code the
meter correctly.
Caution
If the code number on the display and on the test strip vial
do not match, do the "Code the Meter" procedure, page 14 for
accurate result. If any different message appears on the dis-
play due to several causes and conditions please refer to
"Troubleshooting" page 46. Do not perform blood glucose
tests at temperature below +10
°
(104 F) and above 90% relative humidity.
?
° ° °
C (50 F) or above +40 C
37