Set The Date And Time; Set The Test Result Unit (Mg/Dl Or Mmol/L); Set The Temperature Unit (°C Or °F) - B. Braun Omnitest plus Manual

Set the Meter

Set the Date and Time

Press or button to select the year. With the correct year on
display, press the button and the month setting will start fla-
shing. Press or button to select the month and then press
button to set the day. After then press
or button to select the appropriate hour, press
set minutes.
1) Year setting 2) Month and day setting
(The year can range from 2005 to 2099, which is not displayed in normal operation)
Note
Without setting the date properly, the average glucose level
and the results in memory will not show proper value. It is
highly recommended to set the meter before use and to
check the time when a new battery is installed. You can not
test your blood glucose while in the setting mode.
26
button to set time. Press
button to
3) Time setting
Set the Test Result Unit
Press button to set the test result unit. You should now be at the
unit of measurement selection. Select the proper unit of test result
(mg/dL or mmol/L) for your blood glucose measurement by pressing
the or button.
Set the Temperature Unit
Once the unit of test result is selected, press the
the temperature unit. Press
temperature unit.
button to set
or button to select the proper
27