Set The Average Day; Set The Alarm - B. Braun Omnitest plus Manual

Set the Meter

Set the Average Day

button to proceed to set the Average Day. Omnitest
Press
will show 3 different average results and the number of days can
range from 1 to 99 days. The setting mode begins with setting the
number of days of which you would like to receive an average cal-
culation of your glucose level. To increase or decrease the number of
days, press the button or
ton the value will be increased or decreased at a quick rate. With the
correct number of days displayed, press
rage day. AVG character will display during the average day setting.
1) First average 2) Second average
setting setting
28
button; holding the or
button to set next ave-
3) Third average
setting

Set the Alarm

plus Omnitest plus has 5 different alarm settings. The bell icon
® ®
will be displayed during the alarm setting. Alarm setting order is
AL1 ➠ AL2 ➠ AL3 ➠ AL4 ➠ AL5. If the AL2 is OFF the rest of
AL3 ~ AL5 is all OFF.
Press or
but-
If you choose ON, press
Press or
press button to set minutes.
Press button to set next alarm.
Press either
Note
The alarm will not work during the testing
of blood glucose. The loudness of the alarm is
intended to remind you at a glucose measurement
but not to wake you up from deep sleep.
button to select the ON/OFF of alarm function.
button to set the time for alarm.
button to set the proper alarm time (hour),
or button to stop the alarm.
,
29