Set The Meter; Set The Buzzer; Set The 12 Hour Or 24 Hour Mode - B. Braun Omnitest plus Manual

Set the Meter

The Omnitest plus meter has 7 functional setting modes
®
1
2
12 hour/24 hour
3
date and time
4
test result unit (mg/dL or mmol/L)
5 temperature unit (°C or °F)
6 average day
7
If you need to change any of the above settings, you need to enter
the setting mode. Turn on the meter by pressing
for 3 seconds. This will initiate the "Set the Meter" mode. SET icon
will appear on the display during the setting.
To leave the "Set the Meter" mode at any time, press the
for 3 seconds.
If you have missed out a setting, start the "Set the Meter" procedu-
re again.
24
buzzer
alarm
button and hold

Set the Buzzer

Turn on the meter by pressing
Buzzer icon will appear on the display. Press
ON/OFF the buzzer sound.
Note
There is no beep sound during buzzer is OFF when test strip
is inserted and when test result pops up.

Set the 12 Hour or 24 Hour mode

button
After selecting ON or OFF press
Press or
press button to set the date and time.
button and hold for 3 seconds.
for hour mode setting.
button to select the proper time system. And then
or to select
25