RainWise MK4-C Instruction Manual page 19

Mounting Instructions:
» Mount the support mast securely to the support structure using the Mono
Mount or Tripod (sold separately) or standard U-bolts. Do not tighten the
support structure to the MK4-C unit, as directional orientation will be required.
» Rotate the assembled unit until the electronics enclosure with the solar panel
cover faces south if you're in the Northern Hemisphere, or north if you're in the
Southern Hemisphere. This will capture maximum solar energy and help the
anemometer provide accurate wind direction. Use a compass for accuracy.
» Secure the support mast to the assembly. Prevent rotation by lining up the two
holes in each mast
At this point, the entire unit should be secured to the support structure. It is crucial
that the device is oriented as precisely as possible.
M O U N T I N G I N S T R U C T I O N S
| 19