Table of Contents
Advertisement
6
Mounting
Refer to
» Mount the station.
See appendix for Mono Mount and Tripod Mount
mechanical drawings (page 31-32). Find detailed
instructions and installation videos at
https://rainwise.com/mk4-c.
» Confirm that the rain gauge bucket is level using
one of these methods:
3 Place a level across the top of the rain bucket
and take two readings perpendicular to each
other (fig O & P).
3 Cover the rain gauge bucket drain with a
piece of duct tape and add approx. 16 oz of
water. If level, the edges of the water should
be centered in the bottom of the bucket.
Remove the tape to allow the water to pass
through the drain and test the rain gauge
(fig Q).
18 |
M O U N T I N G I N S T R U C T I O N S
https://rainwise.com/mk4-c
Figure Q
Figure O
Figure P
Advertisement
Table of Contents
