Segway Human Transporter i Series Instructor Manual And Participant Workbook page 2

Page 2 of 106
Important information for e Series users
To reduce the risk of injury, all users of e Series models should first
complete training provided by a Segway authorized trainer.
The Segway HT e Series has all the same components as the Segway HT
i Series, and the following additional components and features:
>
A Front Bag Frame and Front Bag
>
A Lower Cargo Structure
>
Two Side Bags
>
An electronic parking stand, called E-Stand, that enables the e Series to balance itself ("park")
without a rider
Please follow these recommendations:
>
Charge your Segway HT for a full 12 hours before the first use.
>
Do not let anyone power on your Segway HT e Series Segway HT or try to engage or disengage
E-Stand, unless that person has completed training, provided by a Segway authorized trainer
>
Don't let anyone step on or ride your e Series Segway HT unless that person has completed
training, provided by a Segway authorized trainer
>
Install the Side Bags onto the Lower Cargo Structure prior to operation
>
Place approximately 10 lbs (4.5 kg) in each Side Bag prior to operation
>
When your Segway HT e Series is parked using E-Stand, make sure no one bumps, pushes, or
leans on the Segway HT
>
To obtain training, or if you have any questions or if any injury incident occurs, call Segway at 1-
866 4SEGWAY
Instructor Guide and Participant Workbook
© Segway LLC 2002
Basic Rider Optimization Training for the Segway HT
Rev 3.5i - January 2004
P/N 1707100001aa