Charging The Battery - Toshiba M10-S405 User Manual

M10-s405 user's guide
Table of Contents

Advertisement

If the main battery is present, the battery light
Amber while the battery is charging
Green when the battery is fully charged
If the battery light flashes amber during charging, either the
battery pack is malfunctioning, or it is not receiving input
from the AC power supply. Disconnect the AC cable and
remove the battery pack. See
on page 203
DANGER: Damaged power cables can cause fire or electric
shock. Never modify, forcibly bend, place heavy objects on
top of, or apply heat to the power cable.
If the power cable becomes damaged or the plug overheats,
discontinue use. There is a risk of electric shock.
Never remove the power plug from the outlet with wet hands.
Doing so may cause an electric shock.

Charging the battery

Your computer came with its battery already installed. Before
using the battery to power the computer, you must charge it.
To charge the battery, leave the computer plugged in to an AC
power source for at least three hours with the computer turned off.
After that, the battery will be completely charged and ready to
power the computer.
CAUTION: Once the battery is charged for the first time,
avoid leaving the computer plugged in and turned off for
more than a few hours at a time. Continuing to charge a fully
charged battery can damage the battery.
Setting up your computer
for troubleshooting information.
Getting Started
"If Something Goes Wrong"
51
glows:

Advertisement

Table of Contents
loading

Table of Contents