Table of Contents
Advertisement
102
Learning the Basics
Powering down the computer
Sample system power mode settings
5
Click the Override all Modes with settings here button.
❖
Click DC only to apply the settings only when you are using
battery power.
❖
Click All to apply the settings whenever when you are using
battery power or outlet power.
6
Click OK,
7
Click OK again, then close the Control Panel.
NOTE: For more information about the Power Saver utility,
see
Starting again after Shut down
To start the computer up again, press the power button until the on/
off light changes to green.
If you shut down the computer by closing the display panel, you
can start it again by opening the display panel.
"Toshiba Power Saver utility" on page
177.
Advertisement
Table of Contents
