Connecting an optional external USB diskette drive
Connecting external speakers or headphones
To attach an external stereo output device:
1
Locate the headphone jack on the front of the computer.
2
Using any necessary adapters, plug the cable from the
external audio device into the headphone jack. The
headphone jack requires a 3.5 mm 16-ohm stereo jack.
When the headphone is inserted, the internal speakers are
automatically disabled. For more information, refer to
page
Connecting a microphone
To record high-quality sounds, you can attach a microphone:
1
Locate the microphone jack on the front of the computer.
2
Plug the microphone cord into the microphone jack.
3
Turn on the microphone.
NOTE: There is a microphone Set Up Wizard located in the
Control Panel under the Sound Max control panel.
Connecting external speakers or headphones
32.
Getting Started
73