Installing The Mulching Baffle (Optional); Preparing The Machine - Toro Groundsmaster 4300-D Operator's Manual

4
Installing the Mulching
Baffle (Optional)
No Parts Required
Procedure
1. Thoroughly clean debris from the mounting
holes on the rear wall and left side wall of the
chamber.
2. Install the mulching baffle in the rear opening
and secure it with 5 flange-head bolts
1. Mulching baffle
3. Verify that the mulching baffle does not interfere
with the tip of the blade and does not protrude
inside the surface of the rear chamber wall.
DANGER
The high-lift blade, if used with the
mulching baffle, could break, resulting in
personal injury or death.
Do not use the high-lift blade with the
mulching baffle.
(Figure
Figure 4
5

Preparing the Machine

No Parts Required
Checking the Tire Pressure
Check the tire pressure before use; refer to
the Tire Pressure (page
Important:
Maintain pressure in all tires to
ensure a good quality of cut and proper machine
performance. Do not underinflate the tires.
4).
Checking the Fluid Levels
1. Check the engine-oil level before starting the
engine; refer to
(page 51).
2. Check the hydraulic-fluid level before starting
the engine; refer to
System (page
3. Check the cooling system before starting the
engine; refer to
(page 57).
Greasing the Machine
g011347
Grease the machine before use; refer to
Bearings and Bushings (page
grease the machine results in premature failure of
critical parts.
11
23).
Checking the Engine-Oil Level
Checking the Hydraulic
23).
Checking the Cooling System
Greasing the
48). Failure to properly
Checking