Product Overview; Controls - Toro Groundsmaster 4300-D Operator's Manual

Product Overview

Controls

Seat Adjusting Knobs
The seat-adjusting lever
the seat forward and rearward. The weight-adjusting
knob adjusts the seat for your weight. The weight
gauge indicates when the seat is adjusted to your
weight. The height-adjusting knob adjusts the seat
for your height.
1. Weight gauge
2. Weight-adjusting knob
Traction Pedal
The traction pedal (Figure
reverse operation. Press the top of the pedal to move
forward and the bottom to move rearward. Ground
speed depends on how far you press the pedal. For
no load, maximum ground speed, fully press the pedal
while the throttle is in the F
To stop the machine, reduce foot pressure on the
traction pedal and allow it to return to the center
position.
Mow-Speed Limiter
When the mow-speed limiter
controls the mow speed and allows the cutting decks
to be engaged. Each spacer adjusts the mowing
speed by 0.8 km/h (0.5 mph). The more spacers you
have on the top of the bolt, the slower the machine
moves. To transport the machine, flip back the mow
speed limiter for maximum-transport speed.
(Figure 5) allows you to adjust
Figure 5
3. Height-adjusting knob
4. Adjusting lever (forward
and rearward)
6) controls the forward and
position.
AST
(Figure 6) is flipped up, it
Brake Pedal
Press the brake pedal
Parking Brake
To engage the parking brake,
the brake pedal and press the top forward to latch. To
disengage the parking brake, press the brake pedal
until the parking-brake latch retracts.
g003954
1. Traction pedal
2. Mow-speed limiter
3. Spacers
Tilt-Steering Pedal
To tilt the steering wheel toward you, press the foot
pedal (Figure 6) down, and the steering tower toward
you to the most comfortable position, and release the
pedal.
Engine-Speed Switch
The engine-speed switch
change the engine speed. Tap the switch to increase
or decrease the engine speed in 100 rpm increments.
Hold the switch down to automatically move the
engine to High or Low idle, depending on which end
of the switch that you press.
12
(Figure 6) to stop the machine.
(Figure 6) push down
Figure 6
4. Brake pedal
5. Parking brake
6. Tilt-steering pedal
(Figure 7) has 2 modes to
g003955