Safety; General Safety; Safety And Instructional Decals - Toro Groundsmaster 4300-D Operator's Manual

Safety

This machine has been designed in accordance with
EN ISO 5395:2013 and ANSI B71.4-2012.
Important:
For CE required regulatory data, refer
to the Declaration of Conformity supplied with
the machine.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Do not put your hands or feet near moving
components of the machine.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Cutting/dismemberment—hazard, fan-stay away from
moving parts.
1. Warning—do not carry passengers.
1. Cutting/dismemberment hazard; fan—stay away from
moving parts.
93-6681
93-6689
93-7272
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep clear of any discharge opening. Keep
bystanders and pets a safe distance away from
the machine.
•
Keep children out of the operating area. Never
allow children to operate the machine.
•
Stop the machine and shut off the engine before
servicing, fueling, or unclogging the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this Operator's Manual.
decal93-6681
1. Warning—read the Operator's Manual for instructions on
torquing the blade bolt/nut to 115 to 149 N∙m (85 to 110
ft-lb).
decal93-6689
decal93-7272
1. Warning—do not touch the hot surface.
2. Cutting/dismemberment hazard, fan and entanglement
hazard, belt—stay away from moving parts.
4
93-7818
106-6754
decal93-7818
decal106-6754