Specifications - Toro Greensmaster TriFlex 3320 Operator's Manual

Fuel-Shutoff Valve
Close the fuel-shutoff valve
the seat and under the fuel tank, when storing or
transporting the machine on a truck or trailer.
Figure 22
1. Fuel shutoff (under the fuel tank)
(Figure 22), behind
g014626
Cutting Unit Power Disconnect
Connectors
Before installing, removing, or working on the cutting
units, disconnect the cutting units from the power
supply by separating the cutting unit power disconnect
connectors (Figure
rollover bar on the left side of the traction unit. Plug
the connectors together before operating the machine.
1. Cutting unit power disconnect connector
CAUTION
If you do not disconnect the power to the
cutting units, someone could accidentally
start the cutting unit, causing serious injury
to hands and feet.
Always separate the cutting unit power
disconnect connectors before working on the
cutting units.

Specifications

Note:
Specifications and design are subject to
change without notice.
Width of cut
Wheel tread
Wheel base
Overall length (w/baskets)
Overall width
Overall height
Weight
22
23), located at the base of the
Figure 23
151 cm (59.5 inches)
128 cm (50.5 inches)
119 cm (46.9 inches)
249 cm (98.0 inches)
179 cm (70.6 inches)
205 cm (80.8 inches)
Refer to the machine serial
tag
g016588
(Figure 1).