Toro Greensmaster TriFlex 3320 Operator's Manual page 19

•
E R /S
NGINE PM TATUS
•
F L —indicates that there is a current fault
AULT OG
log to review.
•
G V
ENERATOR OLTAGE
generator voltage.
•
H M —indicates the total hours the
OUR ETER
machine has operated. It starts to function
whenever the key switch is rotated to On.
•
PTO S —indicates the PTO speed.
PEED
•
B V —indicates the battery potential
ATTERY OLTAGE
in Volts.
•
C T
OOLANT EMPERATURE
coolant temperature in either °C or °F.
•
F C
UNCTIONAL ONTROL
indicated by a rabbit and mow mode is indicated
by a turtle.
•
E O P
NGINE IL RESSURE
the engine oil pressure drops below a safe level.
•
M A /B
ENU CCESS ACK
access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
D button—use this button to scroll down
OWN
menus.
•
R button—use this button to open a menu
IGHT
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button will be labeled with an icon displaying its
current function.
Using the Menus
To access the InfoCenter-menu system, press the
M A button while at the main screen. This
ENU CCESS
brings you to the M
AIN
tables for a synopsis of the options available from
the menus:
M M
AIN ENU
Menu Item
F
AULTS
S
ERVICE
—indicates the engine rpm.
/S —indicates the
TATUS
—indicates the engine
S —transport mode is
TATUS
light—this icon appears if
button—press this button to
M . Refer to the following
ENU
Description
The F menu contains
AULTS
a list of the recent machine
faults. Refer to the Service
Manual or your Authorized
Toro Distributor for more
information on the F
AULTS
menu and the information
contained there.
The S menu contains
ERVICE
information on the machine
such as hours of use and other
similar numbers.
D
IAGNOSTICS
S
ETTINGS
A
BOUT
S
ERVICE
Menu Item
H
OURS
C
OUNTS
B
ACKLAP
D
IAGNOSTICS
Menu Item
E R
NGINE UN
S1–S4
R E
EELS NABLE
S
ETTINGS
Menu Item
U
NITS
L
ANGUAGE
LCD B
ACKLIGHT
LCD C
ONTRAST
19
The D menu
IAGNOSTICS
lists various states that the
machine currently has. You
can use this to troubleshoot
certain issues as it will quickly
tell you which machine
controls are on and which are
off.
The S menu allows
ETTINGS
you to customize and modify
configuration variables on the
InfoCenter display.
The A menu lists the
BOUT
model number, serial number,
and software version of your
machine.
Description
Lists the total number of hours
that the machine, engine,
reels, backlap, and fan have
been on, as well as the
number of hours the machine
has been transported and
overheated.
Lists the number of preheats
and starts the machine has
experienced.
Turns backlapping O /O
N FF
(once ON you can turn
backlapping Off with this
setting or by turning off the
ignition key).
Description
Indicates if the following items
are active: Key start, key run,
joystick lower, joystick raise,
neutral, seat or parking brake,
OK run, and RTR or ETR.
Controls the raising and
lowering of the solenoids.
Indicates if the eReel is
enabled.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or metric.
Controls the language used
on the InfoCenter.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.