Usage Of The Product; Specifications - Yoshitake DP-100 Series Product Manual

The DP-100 series, solenoid valves of pilot-operated type, are used for automatic on-off control of a fluid flow
in combination with remote operated equipments or various control switches.
Normally closed
Normally open
Nominal size
Structure
Application
Working pressure
Min. differential pressure
(*1)
Allowable valve seat leakage
Temperature range
Ambient temperature
Installation posture
(*1)
Body
Piston
Valve disc
Connection
*1: See Table 1.

1. Usage of the Product

2. Specifications

DP-100 and DP-100-D
50 mL/min under standard conditions (at air pressure of 0.6 MPa)
Table 1 Min. differential pressures and installation postures
Horizontal piping
Coil
Min. Differential press.: 0 MPa
Min. Differential press.: 0.03 MPa
DP-100-C
10-50A
Pilot-operated piston type
Steam, Air, Cold and hot water, N
Co gas (dry), Ar gas, Oil (20 cSt or less)
2
0-1.0 MPa (Unusable under vacuum)
(0.03 MPa or more is required for vertical installation)
5-180˚C (no freeze condition)
50˚C or less (no freeze condition)
Vertical or horizontal installation
( within 90 degrees from upward position of the coil)
Cast stainless steel
Stainless steel
JIS Rc screwed
±5˚
Within 90˚
Within 90˚
Coil
Min. Differential press.: 0.03 MPa
1
DP-100F and DP-100F-D
DP-100F-C
15-65A
gas,
2
0 MPa
PTFE
JIS 10K FF flanged
Vertical piping
Coil
■EPDT-247i■