Electric Bilge Pumps - BENETEAU OCEANIS 45 Owner's Manual

Electric bilge pumps

- The bilge pumps are powered by DC.
- Location of the electric bilge pumps:
Ref 3 Ref 3'
The switch for the electric bilge pump is located on the switch panel (Ref 4).
- The electric bilge pump must only be used to discharge stagnant water at the bottom of the bilge. It must not be used to pump out any oil-based products (petrol, oil) or
inflammable liquids.
Operation:
I- Turn on the battery switches.
II- Open the draining valve. (Access: Starboard cockpit locker)
III- Switch on the bilge pump (Ref 4).
If the boat is equipped with an automatic bilge pump, the switch has an always-on position.
32
Safety