Launch/Lift Out; Before Launching - BENETEAU OCEANIS 45 Owner's Manual

13.4

LAUNCH/LIFT OUT

The initial commissioning of your boat will require a lot of skill and care. The proper working of all your boat's equipment
is the result of the quality of the commissioning operations. This is why the initial launch must be overseen by your dealer.

Before launching

- Replace the log in its housing.
- Check the cleanliness of the sea water strainers.
- Check the anodes (see Chapter: Electricity).
- Check the propeller (see Chapter: Steering).
- Prepare enough fenders and lines.
- Check the engine's sea water intake valve and the fuel feed valve (see Chapter: Engine).
115
Do not remain onboard or beneath the boat
during the handling operations.
- Before any handling, make sure that the
gear lever is in the forward position (Dock and
Go version).
- When placing the slings make sure that the
positioning marks are still visible.
- Submerge the sling fully under the engine
mounting.
13 13