During lift-out
- Check that the propellers turn properly, with neither play nor stiffness.
- Clean the blades carefully.
- Remove the propeller, clean the shaft support, smear the shaft with silicone-based grease before refitting the propeller.
- After cleaning and applying a primer, antifoul the housing and the propellers.
Location: Forward cabin
1. Battery - 2x50A
2. Fuse
3. Motor
4. Positive battery isolator switch
Control: Cockpit
Anode / Nozzle
101
- Refer to the manufacturer's instructions for
use and maintenance.
- Never run the motor when the propeller is
out of the water.
- In the case of dual control, be careful to use
just one control at a time.
- The motor must not run for longer than
3 minutes (risk of overheating).
11 11