Manual Upgrade - Mitel MiVoice 6920 User Manual

C
USTOMIZING YOUR PHONE
To view/edit the Voice Services settings on the Mitel MiVoice 6920 IP phone:
Press the
1.
Navigate to Voice Services using the navigation keys and press the Select softkey.
2.
Use the up and down navigation keys to choose one of the following and then press Next soft key.
3.
MiCloud Connect
–
MiCould Border Gateway
–
Make the required changes.
4.
Press the Save/Register softkey to save your changes.
5.

Manual Upgrade

By factory default, the 6900 Series IP Phones have the MiNet firmware pre-installed. You can upgrade
the default firmware to the latest release of MiNet. You can also enable interoperability with Mitel's
SIP-based solutions by upgrading the 6900 Series IP Phones to the SIP firmware.
To perform the manual upgrade, you must configure a connection to the server where the firmware is
stored. The 6900 Series IP Phones support the following protocols to download a new firmware:
TFTP
•
FTP
•
HTTP
•
HTTPS
•
: The server must be configured to support downloading firmware using any of these protocols.
NOTE
To configure connection settings for manual upgrade:
Press the
1.
Navigate to Voice Services > Manual Upgrade and press Next softkey.
2.
: The service options under Voice Services also displays MiCloud Connect, if the IP phone has
NOTE
an alternate SIP load available.
In the Download Protocol field, select the protocol for downloading firmware from the server.
3.
(Settings) key on the phone to enter the Settings menu.
key to enter the Settings menu.
V S
OICE ERVICES
29