Advertisement
AC-MX1616-aUHD
18Gbps True 4K60 4:4:4 16x16 Matrix (Ultra Low Profile)
Quick Start Guide
The AC-MX1616-AUHD is a true high bandwidth powerhouse. Supporting the full
HDMI 2.0a/b specification and supporting every flavor of HDR, this matrix will
ensure you can get the most out of any system. This unit supports uncompressed
HDR formats Including HDR, HDR10, HDR10+, Dolby Vision, HLG, BBC and NHK. All of
them are supported in up to 4K 60Hz and up to 12 Bit Deep Color. All color space
compression is compatible.
This quick start guide will be going through:
•
Install
•
front pannel control
•
•
•
Netwrok settings
•
InstALLATION
1.Connect the HDMI input sources (Blu-ray, Set Top Box, etc...) to the AC-MX1616-AUHD
2.Connect the HDMI output devices (Display, Distribution Amplifier, Extender) to the AC-
MX1616-AUHD
3.Power on the sources
4.Connect the power supply's into the AC-MX1616-AUHD(You need to plug in both supply's)
5.Turn on output devices/displays6.You may now use the front panel controls, supplied IR
remote or free PC software to control the switch.
Full matrix control is available on the internal WebOS - Simply plug the matrix into the network and
punch in the default IP (192.168.1.239) or use DHCP to connect to a full control system! The WebOS is
designed with mobile devices in mind, so feel free to use you phone or tablet for real-time control.
the four inputs.
Advertisement
Table of Contents
Related Manuals for AVPro Edge AC-MX1616-AUHD
Summary of Contents for AVPro Edge AC-MX1616-AUHD
- Page 1 Netwrok settings • Troubleshooting InstALLATION 1.Connect the HDMI input sources (Blu-ray, Set Top Box, etc...) to the AC-MX1616-AUHD 2.Connect the HDMI output devices (Display, Distribution Amplifier, Extender) to the AC- MX1616-AUHD 3.Power on the sources 4.Connect the power supply’s into the AC-MX1616-AUHD(You need to plug in both supply’s) 5.Turn on output devices/displays6.You may now use the front panel controls, supplied IR...
- Page 2 Audio, Matrixing and network. All without connecting a PC or hooking anything up. This additional mode of control is a welcome resource on the job site.WebOS Switching: The AC-MX1616-AUHD can be switched from the front panel by selecting the OUTPUT, Press ENTER, then select the INPUT: 1.Press the button (1 through 16) that corresponds with the OUTPUT (Display, or Sink...
- Page 3 EDID Management: Instantly and easily set and manage EDID functions right from the front screen. EDID management will help you get the right signal from the source device adding additional security that nothing unsupported will be mistakenly fed into the system.
- Page 4 IR Details: IR IN on this machine is for controlling the AC-MX1616-AUHD, RS232 or IP Control are the recommended methods, but IR can be used in some circumstances. The IR INPUT is for an IR Receiver EYE only. The IR Receiver Eye below can plug into the IR Ext.
Need help?
Do you have a question about the AC-MX1616-AUHD and is the answer not in the manual?
Questions and answers