Changing The Setpoint - Thermo Scientific Premium Series Quick Start Manual

Section 4 Operation
Changing the
Setpoint
4-40
The Setpoint is the desired fluid temperature. The circulator can store up
SP1
to five setpoints,
stored setpoint values is discussed later in this Section.
• On the Start Display press
Menu
In
The following display appears:
Ramp 1
Ramp 2
• Press to the right of the desired setpoint (in this example
and then press , or
return to the Start Display.
Menu
SP5
through . The procedure for changing the
to the right of
Water
24.29°C
to the left of the home symbol
In
Water
24.29°C
SP1
.
SP1
20.00C
SP1
20.00°C
SP2
37.00°C
SP3
50.00°C
SP4
70.00°C
SP5
95.00°C
SP3
)
, to
SP3
50.00°C
Thermo Scientific