Table of Contents
Advertisement
Memory module problems
Incorrectly connected or faulty memory modules may cause
errors that seem to be device-related. It is worthwhile
checking for these first:
1
Turn off your computer according to the instructions in
"Turn Off or Shut down command" on page
2
Remove the memory module, following the instructions
in
3
Reinstall the memory module, following the instructions
in
and making sure it is seated properly.
4
Check for the error again.
5
If the error recurs, remove the memory module entirely
and check for the error again.
If removing the memory module eliminates the error, the
memory module may be faulty. If the error recurs without
the memory module installed, the error is not caused by
the memory module.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its gold connector bar (on the side you insert into the
computer).
"Removing a memory module" on page
"Installing additional memory (optional)" on page
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
If Something Goes Wrong
Resolving a hardware conflict
219
105.
74.
67,
Advertisement
Table of Contents
