Directing The Display Output When You Turn On The Computer - Toshiba A20-S259 User Manual

4 The Monitor Settings window appears and asks if you
want to keep the settings.
5 Click Yes.
6 To change the settings back, repeat steps 2 through 5.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 While holding down
desired setting is highlighted.
This hot key cycles through the display output settings in
the following order:
❖
❖
❖
❖
❖
Changing the display properties setting
Built-in display panel only
Built-in display panel and external monitor
simultaneously
External monitor only
Built-in display panel and external video device
simultaneously
To use this setting, you must first enable the different
refresh rates option. See
refresh rates" on page
Other external video device only
Exploring Your Options
, press repeatedly until the
Fn F5
"Enabling different video
188.
187
+ ).
Fn F5