Table of Contents
Advertisement
Changing the main battery
When your battery power is running low, you have two
options: connect the computer to an AC power source or
install a charged battery.
Removing the battery from the computer
1
Save your work.
2
Turn off the computer via the Start menu.
See
3
Remove all cables connected to the computer.
4
Close the display panel and turn the computer upside
down.
5
Slide the battery release latch to free the battery, then
firmly pull the battery toward yourself.
If your battery discharges fully, your information will be lost.
Be sure to save your work often.
When handling a battery, be careful not to drop it or short-
circuit its terminals. Also, do not drop, hit or otherwise impact
the battery. Do not scratch or break the casing and do not twist
or bend the battery.
Do not remove the battery while the computer is in Standby
mode. Data in memory will be lost.
"Using Turn Off or Shut down" on page
If the battery is leaking or its case is cracked, put on protective
gloves to handle it, and discard it immediately following the
advice in
"Disposing of used batteries safely" on page
Mobile Computing
Changing the main battery
131
107.
135.
Advertisement
Table of Contents
