Table of Contents
Advertisement
76
Getting Started
Installing additional memory (optional)
3
Carefully remove the module from the slot.
Removing the memory module
4
Complete the procedure by following steps 9 through 14
in
Checking total memory
When you add or remove memory, you can check that the
computer has recognized the change. To do this:
1
Click Start, Control Panel
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector (on the side you insert into the
computer).
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
"Installing additional memory (optional)" on page
67.
Advertisement
Table of Contents
