Toshiba Strata CIX LVMU Installation And Programming Manual page 34

Maintenance
Shut Down the LVMU
Shutdown Using the Telephone Dial Pad Method
Important!

To enable shutdown procedure and change mailbox 983 security code
Important!
1. Using UAdmin, log on to the LVMU. The UAdmin Main Menu displays.
2. Press Alt+U. The Users Menu, Options screen displays.
3. In the
4. Using the arrow down key, place the cursor in the
5. Type the new security code.
Note
6. Navigate to the
7. Press the spacebar to change the field from On to Off.
Note
8. Press Alt+S to save the changes.

To shut down the LVMU using the telephone dial pad
1. From the telephone dial pad, call the LVMU. Once you dial into the LVMU, the system answers
with the enter your security code greeting. Press # to bypass. The LVMU prompts you to enter
the User ID.
2. Enter 983. The LVMU prompts you to enter the security code.
Important!
3. Enter the new security code (the default is 983997) and press #. All inactive channels are
taken off-hook. All active channels are given a 60 second time delay to complete processing
the current activity. After 60 seconds, they are disconnected and the system shuts down.
Note
Important!
Shutdown Using UAdmin's Main Menu
1. From UAdmin's Main Menu, select Shutdown by pressing Alt+s. The LVMU asks for the
password.
2. Enter the password (the default is
select one of the following options:
•
Shutdown and Restart CURRENT Version — Restarts the LVMU.
•
Shutdown and Trace CURRENT Version — Shuts down, then restarts LVMU in the TRACE
mode (TRACE.OUT file is created) on the LVMU's flash drive.
24
System shutdown using the telephone dial pad is not operable if UAdmin is
connected.
It is extremely important that the security code for mailbox 983 be changed. If the
security code is not changed, it is possible for someone who knows the LVMU's
default password scheme to call into the system and shut it down.
User ID
field, type 983 and press Enter. The Options screen displays for box 983.
For added security, the security code does not appear on the screen as you type it.
Do Not Disturb
Changing the Do Not Disturb option enables the token programming residing in the
Extension field of the mailbox. It is the token string in this mailbox that performs the
shutdown procedure.
You must wait until the entire prompt has been played before entering the security
code. If the code is entered prior to the completion of the prompt, the shutdown does
not occur.
The LVMU is completely shut down when the status light is Out and all port LEDs are On.
For security reasons, you should change the default security code.
Security Code
field.
) and press Enter. The screen enables you to
Stratagy
field.
LVMU Installation Guide 03/06