Load safety information The Z5399 YP Mounting bracket is designed to support one YP or YiP loudspeaker. No additional loads must be added. The bracket must only be used in an upright position or suspended vertically as shown in the graphic opposite.
1.3 Intended use The d&b Z5399 YP Mounting bracket must only be used in conjunction with d&b YP or YiP cabinets. The tie bar of the outer bracket is supplied with two M8 threaded inserts at the standard d&b spacing (115 mm [4.5"]) for attaching the following accessories: ▪...
When out of use the rigging components must be disposed of in accordance with the national environmental regulations. Ensure that damaged rigging components are disposed of in a way that they cannot be used again. d&b Z5399 Mounting instructions 1.2 en...