Load safety information The Z5398 YP Horizontal bracket is designed to support one YP loudspeaker (Yi7P or Yi10P). No additional loads must be added. d&b Z5398 Mounting instructions 1.3 en...
1.3 Intended use The d&b Z5398 YP Horizontal bracket must only be used in conjunction with d&b YP or YiP cabinets (Y7P/Yi7P or Y10P/ Yi10P) as described in these mounting instructions. The bracket can be: ▪ horizontly or verticaly mounted to walls.
To attach the bracket to walls or ceilings, use the holes shown in the graphic opposite to provide adequate support. A corresponding fixing template is supplied with these mounting instructions. Refer to Þ Chapter 2 "Fixing template" on page 8. d&b Z5398 Mounting instructions 1.3 en...
Page 7
Tools required: ▪ Open-ended spanner/wrench (size #17) 1. Attach the cabinet to the prepared bracket. 2. Insert the screws together with the spring and U washers. 3. Align the cabinet and tighten the screws. d&b Z5398 Mounting instructions 1.3 en...
Built-in dimensions Z5398 Dimensions in mm [inch] Z5398 Mounting options 1,2 and 3 with built-in dimensions in mm [inch] d&b Z5398 Mounting instructions 1.3 en...
When out of use the rigging components must be disposed of in accordance with the national environmental regulations. Ensure that damaged rigging components are disposed of in a way that they cannot be used again. d&b Z5398 Mounting instructions 1.3 en...