E Setup Menu - Sharp EL-9900 Operation Manual

Chapter 13: Programming Features
E SETUP menu P E
01 Rect
02 Param
03 Polar
04 Web
05 Time
06 uv
07 uw
08 vw
09 Deg
10 Rad
11 Grad
210
SETUP menu commands are used to set the various settings
used in graphing and calculations.
Rect
Sets the graph coordinates as X and Y coordinates.
Param
Sets the graph coordinates as parametric coordinates.
Polar
Sets the graph coordinates as polar coordinates.
Web
Sets the graph coordinates as axes in sequence graphs.
–
u(n 1) is set to the X axis and u(n) is set to the Y axis.
Time
Sets the graph coordinates as axes in sequence graphs.
n is set to the X axis and u(n), v(n) and w(n) is set to the Y axis.
uv
Sets the graph coordinates as the axes of sequence graphs.
u(n) is set to the X axis and v(n) is set to the Y axis.
uw
Sets the graph coordinates as the axes of sequence graphs.
u(n) is set to the X axis and w(n) is set to the Y axis.
vw
Sets the graph coordinates as the axes of sequence graphs.
v(n) is set to the X axis and w(n) is set to the Y axis.
Deg
Rad
Grad
Sets the angle mode to degree, radian and gradient, respectively.