Sharp EL-9900 Operation Manual page 129

1. While in the SLIDE SHOW menu, press E to select E
EDIT, then press 1 to select the 1 MOVE sub-menu item.
2. With the { and } cursor keys, select the captured
image you wish to move, then press E.
3. Select the position to which you wish to move the previously
selected image using the { and } cursor keys.
4. Pressing E will place the selected image at the new
location. The selected image will be placed immediately before
the current screen.
2 DEL
This sub-menu tool deletes the selected image captured in the
SLIDE SHOW.
1. While in the SLIDE SHOW
menu, press E to select
E EDIT, then press 2 to
select the 2 DEL sub-menu
item.
2. With the { and } cursor keys, select the image you
wish to delete.
3. Press E to remove the selected image from the SLIDE
SHOW file.
3 RENAME
Use this sub-menu tool to rename the SLIDE SHOW.
1. In the SLIDE SHOW menu, press E to select E EDIT, then
press 3 to select the 3 RENAME sub-menu item.
2. The following screen enables you to change the SLIDE SHOW
name.
3. Type the new name.
The default input mode is A-LOCK.
If you wish to incorporate numbers, press the A key to
enter numbers.
To switch back into the ALPHA mode, press A again.
4. Pressing E will store the new SLIDE SHOW name.
Chapter 7: SLIDE SHOW Feature
119