Special List Operations; Calculations Using The Ope Menu Functions - Sharp EL-9900 Operation Manual

4. Special List Operations

This calculator has three list calculation menus: OPE, MATH and L_DATA.
* In the Basic mode, L1 to L6 (list names) can be accessed from the LIST menu.

Calculations using the OPE menu functions

1 sortA(
2 sortD(
Note:
sortA( list name )
Sorts lists in ascending order.
Example
• Store list {2, 7, 4} in L1, and
sort L1 in ascending order.
sortD( list name )
Sorts lists in descending order.
Example
• Sort the above list L1 in
descending order.
sortA( list name 1, subordinate list name 1 ,...)
If two or more lists are entered separated by commas, a sort is
performed on the first list as a key, and the following lists are
sorted in the order corresponding to the elements in first list (key
list).
Example
• Store lists {2, 7, 4} and {
-
1} in L1 and L2 respectively,
and sort L1 and L2 in ascend-
ing order using list L1 as a
key list.
Chapter 9: List Features
- -
3, 4,
135