Sd Card Mode - Sharp UP-820F Instruction Manual

SD CARD Mode

In the SD CARD mode, you can save and load the data of your POS terminal to and from an SD card for
various purposes. The types of data available in this mode are as follows:
• Sales data
• Electronic journal data
• T-LOG data
• Programming data
• All RAM data
• Customer name list
Use the following procedure to operate in the SD CARD mode.
Installing SD card
Procedure
▼
216
1.
Push the part of the SD card slot cover indicated by the arrow to
open the cover.
* To close the cover, push the arrowed part in until you hear it click.
2.
Insert the SD card into the slot.
* To remove the SD card, push it again, and it comes out of the slot.
1.
Select "9 SD CARD MODE" in the mode selection window.
2.
Select a pertinent operation.