Backup Data Send Programming; Backup Data Send; Backup Data Receive Programming; Backup Data Receive - Sharp UP-820F Instruction Manual
Pos terminal
Hide thumbs
Also See for UP-820F:
- Instruction manual (282 pages) ,
- Reports manual (82 pages) ,
- Programming manual (56 pages)
Table of Contents
Advertisement
Backup Data Send Programming
Use the following procedure to select the menu option "18 BACKUP SEND":
■ Backup data send
Your POS terminal can send data to another device by RS232 (channel 2).
Procedure
▼
Backup Data Receive Programming
Use the following procedure to select the menu option "19 BACKUP RECEIVE":
■ Backup data receive
Your POS terminal can receive data from another device by RS232 (channel 2).
Procedure
▼
210
Program each item as follows:
• SEND DATA (Use the selective entry)
Select one of the following options (data sources):
ALL RAM
SSP
• SPEED (Use the selective entry)
Select one of the following options (data transmission speeds):
PROGRAMMED: Sends data at a programmed speed.
38400bps:
Sends data at 38400 bps.
19200bps:
Sends data at 19200 bps.
9600bps:
Sends data at 9600 bps.
4800bps:
Sends data at 4800 bps.
2400bps:
Sends data at 2400 bps.
Program each item as follows:
• SPEED (Use the selective entry)
Select one of the following options(data transmission speeds):
PROGRAMMED: Receives data at a programmed speed.
38400bps:
Receives data at 38400 bps.
19200bps:
Receives data at 19200 bps.
9600bps:
Receives data at 9600 bps.
4800bps:
Receives data at 4800 bps.
2400bps:
Receives data at 2400 bps.
Advertisement
Table of Contents
