Turning Power On/Of - Sharp PN-L601B Setup Manual

Caution
• Turn on the monitor first before turning on the PC or
playback device.
Turning on the main power
Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
Turning Power On/Off
Turning power on/off
Press the POWER button or POWER switch to turn the power
ON/OFF.
• Status of the power LED
Green lit
Orange lit
Green flashing
• Status of the touch panel power LED
Green lit
Blinking orange
Alternately blinking green and
orange
Off
Touch panel power LED
Power LED
Status Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
Status Status of the touch panel
Operating normally
Initializing
Touch panel off (power not
supplied, etc.)
7
E