Turning Power On/Off; Turning On The Main Power - Sharp PN-L702B Operation Manual

Caution
• Turn on the monitor first before turning on the PC or
playback device.

Turning on the main power

Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
16
E

Turning Power On/Off

Main power switch
Turning power on/off
Press the POWER button to turn the power ON/OFF.
Touch panel power LED
• Status of the power LED
Status
Green lit
Orange lit
Green flashing
• Status of the touch panel power LED
Status
Green lit
Blinking orange
Alternately blinking green and
orange
Off
Caution
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
• When the touch panel power LED blinks orange or
alternately blinks green and orange, the touch panel is
being initialized. Do not touch the touch panel at this time.
Touching the touch panel may cause malfunctioning.
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in the input signal standby mode and you
press the POWER button on the remote control unit, the
monitor enters standby mode.
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
• To disable the logo screen from displaying when turning
the power ON, set LOGO SCREEN to OFF on the SETUP
menu. (See page 26.)
POWER
button
Power LED
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
Status of the touch panel
Operating normally
Initializing
Touch panel off (power not
supplied, etc.)