Connecting The Power Cord; Binding Cables; Removing The Handles - Sharp PN-L702B Operation Manual

Caution
• Do not use a power cord other than the one supplied with
the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
Cable
Cable clamp
attachment
Cable clamp
The handles can be removed.
Handle
Caution
• The removable handles and handle screws are for use with this monitor. Do not use them for any other devices.
• To attach handles, be sure to use the handles and handle screws which were removed from the monitor.
• Be sure the handles are attached securely.
14
E

Connecting the Power Cord

Binding Cables

Removing the Handles

Handle screws
3
For power
outlet
Power cord (Supplied)
The cables connected to the terminals on the rear of the
monitor can be fastened with the cable clamp.
Insert the cable clamp into the cable clamp attachment on the
rear of the monitor and fasten the cables.
The installation position can be changed.
Main power switch
1
2
AC input terminal