Save The Destination With "Send To Car - Volvo SENSUS NAVIGATION Manual

SPECIFY A DESTINATION
Save the destination with "Send to
Car"
A destination can be specified in different ways -
using the Send to Car function (Send to Car) is
one of them.
Send position to the car
Send to Car (Send to car) is a function that
makes it possible to add a destination or position
to the car's navigation system via a computer.
The Send to Car function can also be used from
the Volvo On Call app. Volvo On Call can also be
used if a destination/position needs to be sent to
the car from the Volvo On Call service centre.
Note that the procedure shown here is only one
example from one of several map service suppli-
ers.
1. Connect with the computer to here.com.
> A map service is opened.
2. Search for desired position.
26
3. Right-click on the position and then click on
the address.
> A side menu/information card is opened.
4. Click on Share in the side menu.
5. Click on Send to car in the side menu.
6. Select the car and enter the car's VIN num-
ber or the e-mail address that is registered to
your Volvo ID. Then click on Send.
7. Click on Done.
> The position is sent to the car.
More information about other suppliers and the
Send to Car function is available on the Volvo
Cars support page (support.volvocars.com).