Volvo SENSUS NAVIGATION Manual page 29

Receiving and using a position in the
car
For the car to be able to receive data it must be
connected to the Internet, see the description in
the section "Connecting the car" in the owner's
manual. If a position is sent to the car with Volvo
On Call then the car's built-in modem is used to
send the data, i.e. no separate Internet connec-
tion is required.
1. When a position has been received by the
car a notification is shown in the centre dis-
play. Tap on the notification/symbol.
> An information card is opened.
2. Select the desired use of the position.
Using a saved position
Received positions are saved in the navigation
system's library and can be used later, see "Set
destination with Latest/Favourites/Library".
Related information
•
Specifying a destination with Latest/Favour-
ites/Library (p. 22)
•
General information about entering a desti-
nation (p. 20)
SPECIFY A DESTINATION
27