Checking The Ip Address; Hardware And Software Requirements - Sharp MX-M200D Software Setup Manual

CHECKING THE IP ADDRESS

There are several settings where the IP address must be entered or checked.
To check the IP address of the machine, hold down the status button on the network expansion kit for at least 2
seconds to print out a Printer Setting List.
Status button
HOW TO RESET THE NETWORK EXPANSION KIT
Caution
To reset the network expansion kit, power on the machine while holding down the status button on the network
expansion kit.
After the network expansion kit is reset, network scanner destination information and scan settings will remain,
however, the network settings and network printer settings will revert to the factory default settings.
HARDWARE AND SOFTWARE
REQUIREMENTS
Before installing the software from the CD-ROM that is provided standard with the machine or the CD-ROM that is
provided with the optional network expansion kit (MX-NB10), make sure that your computer satisfies the following
requirements.
Operating system
Computer type
Display
Other hardware
requirements
*1 Administrator's rights are required to install the software.
*2 Sharpdesk is not supported. The MFP driver, Button Manager, and other software on the "Software CD-ROM" that is provided
standard with the machine are not supported.
*3 The machine's USB 2.0 port will transfer data at the speed specified by the USB 2.0 (Hi-Speed) standard only if the Microsoft
USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional/XP/Vista that Microsoft
provides through "Windows Update" is installed.
*4 Compatible with models preinstalled with Windows 2000 Professional, Windows XP Professional or Windows XP Home
Edition or Windows Vista and which are equipped standard with a USB interface.
36
Windows (standard
machine system)
Windows 2000 Professional*
Windows XP Home Edition*
1,2
Windows Server 2003*
1,2
Windows Server 2008*
IBM PC/AT compatible computer
Equipped standard with a
3 4
USB 2.0* /1.1* port
1024 x 768 dots resolution and 16-bit colour or higher is
recommended.
An environment that allows any of the above operating systems to fully operate
Windows (options)
1
, Windows XP Professional*
1
, Windows 2000 Server*
1
, Windows Vista* ,
Equipped with a
10Base-T/100Base-TX LAN
board
Macintosh (options)
1
, Mac OS 9.0 to 9.2.2,
1,2
, Mac OS X v10.2.8,
Mac OS X v10.3.9,
Mac OS X v10.4.11,
Mac OS X v10.5 to
10.5.6
An environment on
which any of the
operating systems listed
above can fully operate
(including Macintosh
computers with an Intel
processor).