Sharp MX-M200D Software Setup Manual page 18

SETUP IN A WINDOWS ENVIRONMENT
3
Printers connected to the network are
detected. Select the machine and click
the [Next] button.
• If the machine is not found, make sure
Note
that the machine is powered on and that
the machine is connected to the network,
and then click the [Re-search] button.
• You can also click the [Specify condition]
button and search for the machine by
entering the machine's name (host name)
or IP address.
☞
CHECKING THE IP ADDRESS (page
36)
4
A confirmation window appears.
Check the contents and then click the
[Next] button.
5
When the printer driver selection
window appears, select the printer
driver to be installed and click the
[Next] button.
Click the checkbox of the printer driver to be
installed so that a checkmark (
• When the PC-Fax driver is being installed,
Note
this screen does not appear. Go to the
next step.
• The PS3 expansion kit is required to use
the PS printer driver or the PPD driver.
16
6
7
) appears.
8
When you are asked whether or not
you want the printer to be your default
printer, make a selection and click the
[Next] button.
If you are installing multiple drivers, select the
printer driver to be used as the default printer.
If you do not wish to set one of the printer drivers
as the default printer, select [No].
If you clicked the [Custom installation] button
Note
in step 2, the following windows will appear.
• Printer name window
If you wish to change the printer name,
enter the desired name and click the
[Next] button.
• Window confirming installation of the
display fonts
To install the display fonts for the PCL
printer driver, select [Yes] and click the
[Next] button.
• When the PC-Fax driver is being
installed, this screen does not appear.
Go to the next step.
• If you are not installing the PCL printer
driver (you are installing the PS printer
driver or the PPD driver), select [No]
and click the [Next] button.
Follow the on-screen instructions.
Read the message in the window that appears
and click the [Next] button.
Installation begins.
• If you are using Windows Vista/Server
Note
2008
If a security warning window appears, be
sure to click [Install this driver software
anyway].
• If you are using Windows
2000/XP/Server 2003
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the [Continue
Anyway] or [Yes] button.
When the installation completed
screen appears, click the [OK] button.